• <input id="04ysk"><legend id="04ysk"></legend></input>
  • <u id="04ysk"></u>
  • <object id="04ysk"><u id="04ysk"></u></object>

    產品-標準編號

    當前位置:首頁>產品-標準編號

    BS EN 1728:2012 Domestic furniture Beds and mattresses Safety requirements and test methods

    時間:2020-09-18   訪問量:1425
    BS EN 1728:2012 Domestic furniture Beds and mattresses Safety requirements and test methods
    Edition: 20200621 更新 
    SectionSection DescriptionSummary of important content重要內容摘要
    NAForeword1. All test methods for seating used in European Standards for furniture have been collated in one document.
    2. The document now contains methods that were previously listed in EN 581-2, Outdoor furniture, EN 1335-3, Office work chair, and EN 15373, Non-domestic seating.
    1. 本標準匯集了歐標所有有關家具坐具類產品的檢測標準。
    2. 本標準替代了原 EN 581-2 (戶外家具)、EN 1335-3(辦公椅)和EN 15373(非家用座椅)標準。
    1ScopeThis European Standard does not apply to children’s highchairs, table mounted chairs and bath seats which are covered by other European Standards.本標準不適用于兒童用高椅、附著在桌子邊上的嬰兒坐具及沐浴類坐具。
    2Normative referencesNA 
    3Terms and definitionsNA 
    4General test conditions1. Unless otherwise stated, static forces shall be maintained for (10±2) s.
    2. Unless otherwise stated, durability forces shall be maintained for(2±1)s;
    1. 除非特別說明,強度測試時力值保持時間為10±2秒。
    2. 除非特別說明,耐久試驗時力值保持時間為2±1秒。
    5Test equipment and apparatus1. The equipment shall not inhibit deformation nor cause unnatural deformation of the unit/component, i.e. it shall be able to move so that it can follow the deformation of the unit/component during testing.
    2. All loading pads shall be capable of pivoting in relation to the direction of the applied force.
    3. If a loading pad tends to slide, use a slip resistant material between the loading pad and the foam for loading pads (5.8)
    1. 測試設備不應該限制被測試樣品的在受力狀態下的自然變形,換句話說,即測試設備應該跟隨被測試樣品的變形做出響應的調節。
    2. 所有加載墊應該配置活動關節,以便保持加載點的位置和加載方向不變;
    3. (在加載過程中)如果加載點的位置不能保持,可以在加載墊和加載海綿之間墊襯防滑材料。
    SectionSection Description章節內容KW ModelKW Model Desc產品名稱圖片資料下載操作視頻
    5Test equipment and apparatus檢測設備和儀器NA//   
    5.1Loading point template加載墊定位模板KW-BSE-09Seat Loading Point Template歐標坐具加載點模板

     
    5.2Floor(測試)地面KW-BSE-29Rubber Sheet for Furniture Drop Test歐標跌落測試地板

    1600407460792776.jpg

     
    5.3Stops(樣品)阻擋塊KW-BSE-02Stopper擋塊(厚度小于12毫米)

     
    5.4Seat loading pad座面加載墊KW-BSE-01Seat Loading Pad (Hard Wood) 大屁股加載墊(硬木)

     
    5.5Smaller seat loading pad小座面加載墊KW-BSE-03Small Seat Loading Pad 小屁股加載墊

     
    5.6Back loading pad(坐具)靠背加載墊KW-BSE-05Back Loading Pad坐具靠背加載墊

    1600407696656120.jpg

     
    5.7Local loading pad一般性加載墊KW-BSE-04-SPLocal Loading Pad - Universal普通加載墊-萬向(加彈簧)

     
    5.8Foam for use with loading pads加載墊墊襯海綿KW-BSE-08-1010mm PU Foam for Test Seat loading Pads10毫米坐具測試加載海綿襯墊

    1600407744824958.jpg

     
    KW-BSE-08-2525mm PU Foam for Use with Seat Loading Pads25毫米坐具測試加載海綿襯墊

    1600407759346894.jpg

     
    5.9Seat impactor座面沖擊器KW-BSE-11-BSSeating Impacter歐標坐具沖擊器

     
    5.10Impact hammer沖擊錘KW-BSE-22Hammer impact test for furniture坐具沖擊擺錘

    1600407838126452.jpg

     
    5.11Arm rest durability test apparatus(坐具)扶手測試設備KW-BSE-16Arm rest tester坐具扶手試驗機

     
    5.12Test surface for castor testing(坐具)腳輪測試地面NA//


      
    5.13Test weights drop test(坐具)跌落測試加載砝碼KW-BFM-05-MSChair Rear Stability Test Disc坐具后穩定性測試加載模塊

     
    6Chairs Other than Work Chairs  坐具 - 非辦公椅坐具
    6.2 Determination of seat and back loading points(坐具)座面和靠背加載點定位KW-BSE-09Seat Loading Point Template歐標坐具加載點模板

     
    6.3Determination of Back Angle(坐具)靠背(后傾)角度測量KW-BSE-09Seat Loading Point Template歐標坐具加載點模板

     
    KW-86Angle Gauge傾角測試儀

    1600407965165289.jpg

     
    6.4Seat static load and    back static load test (坐具)座面和靠背強度測試KW-BSE-17Universal test rig for EN furniture
    多功能家具綜合框架試驗機

     
    KW-BSE-23Seat and Back Bending Tester單座位坐背聯合測試機

    1600408046503426.jpg

     
    KW-BFM-38-2Two positions seat and back tester
    二工位坐具綜合試驗機-前推式

     
    6.5Seat Front Edge Static Load(坐具)座面前邊沿強度測試KW-BSE-17Universal test rig for EN furniture
    多功能家具綜合框架試驗機

     
    KW-BFM-38-2Two positions seat and back tester
    二工位坐具綜合試驗機-前推式

     
    6.6Vertical load on back rests(坐具)靠背垂直強度測試KW-BSE-17Universal    test rig for EN furniture
    多功能家具綜合框架試驗機

     
    KW-BFM-38-2Two positions seat and back tester
    二工位坐具綜合試驗機-前推式

     
    6.7Horizontal forward static load test on back rests(坐具)靠背水平向前強度測試KW-BSE-17Universal test rig for EN furniture
    多功能家具綜合框架試驗機

     
    KW-BFM-38-2Two positions seat and back tester
    二工位坐具綜合試驗機-前推式

     
    6.8Foot rest static load test(坐具)腳踏(垂直)強度測試KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久試驗機

    1600411711647684.jpg

     
    6.9Leg rest static load test(坐具)墊腳(垂直)強度測試KW-BSE-17Universal test rig for EN furniture
    多功能家具綜合框架試驗機

     
    KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久試驗機

    1600411711647684.jpg

     
    6.10Arm rest sideways static load test(坐具)扶手水平側拉強度測試KW-BSE-16Arm rest tester坐具扶手試驗機

     
    6.11Arm rest downwards static load test(坐具)扶手垂直下壓強度測試KW-BSE-16Arm rest tester坐具扶手試驗機

     
    6.12Headrest static load test(坐具)頭枕強度測試KW-BSE-24 Bending test rig for seat back mechanism or front coner坐具交替耐久試驗機

    1600411711647684.jpg

     
    6.13Vertical upwards static load on arm rests扶手提起(坐具)強度測試KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久試驗機

    1600411711647684.jpg

     
    KW-BFM-11Seating Impact Tester 座面沖擊測試機

     
    6.14Vertical static load on auxiliary writing surfaces(坐具附帶的)寫字板垂直強度測試KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久試驗機

    1600411711647684.jpg

     
    6.15Leg forward static load test坐具前推的腿強度測試KW-BSE-17Universal test rig for EN furniture
    多功能家具綜合框架試驗機

     
    KW-BFM-38-2Two positions seat and back tester
    二工位坐具綜合試驗機-前推式

     
    6.16Leg sideways static load test 坐具側推的腿強度測試KW-BSE-17Universal test rig for EN furniture
    多功能家具綜合框架試驗機

     
    KW-BFM-38-2Two positions seat and back tester
    二工位坐具綜合試驗機-前推式

     
    6.17Combined seat and back durability test(坐具)座背聯合耐久測試KW-BSE-17Universal test rig for EN furniture
    多功能家具綜合框架試驗機

     
    KW-BSE-23Seat and Back Bending Tester單座位坐背聯合測試機

    1600408046503426.jpg

     
    KW-BFM-38-2Two positions seat and back tester
    二工位坐具綜合試驗機-前推式

     
    6.18Seat front edge durability test(坐具)前邊沿耐久測試KW-BSE-17Universal test rig for EN furniture
    多功能家具綜合框架試驗機

     
    KW-BSE-16Arm rest tester坐具扶手試驗機

     
    6.19Durability test on seating with a multi-position back rest(坐具)靠背可調的后傾機構耐久測試KW-BFM-38-2Two positions seat and back tester
    二工位坐具綜合試驗機-前推式

     
    6.20Arm rest durability test(坐具)扶手耐久測試KW-BSE-16Arm rest tester坐具扶手試驗機

     
    6.21Foot rest durability test(坐具)腳踏耐久測試KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久試驗機

    1600411711647684.jpg

     
    KW-BSE-17Universal test rig for EN furniture
    多功能家具綜合框架試驗機

     
    KW-BFM-38-2Two positions seat and back tester
    二工位坐具綜合試驗機-前推式

     
    6.22Auxiliary writing surfaces durability test(坐具附帶的)寫字板耐久測試KW-BSE-16Arm rest tester坐具扶手試驗機

     
    6.23Tipping seat operation(影院坐具)座面翻轉耐久測試KW-GBF-16Public tipping seat operation tester公共座椅座面翻轉耐久試驗機

    1600412519609216.jpg

     
    6.24Seat impact test(坐具)座面沖擊測試KW-BSE-17Universal test rig for EN furniture
    多功能家具綜合框架試驗機

     
    KW-BFM-11Seating Impact Tester座面沖擊測試機

     
    KW-GBF-32Universal drop or impact test for finished furiture test rig 家具綜合沖擊(跌落)試驗臺

    1600412381155436.jpg

     
    6.25Back impact test(坐具)靠背錘擊測試KW-BSE-22Hammer impact test for furniture坐具沖擊擺錘

    1600407838126452.jpg

     
    6.26Arm rest impact test(坐具)扶手(側向)錘擊測試KW-BSE-22Hammer impact test for furniture坐具沖擊擺錘

    1600407838126452.jpg

     
    6.27Drop tests(坐具)跌落測試 KW-GBF-32Universal drop or impact test for finished furiture test rig家具綜合沖擊(跌落)試驗臺

    1600412381155436.jpg

     
    KW-BFM-05-MSChair Rear Stability Test Disc坐具后穩定性測試加載模塊

     
    6.28Backward fall test(坐具)后跌測試NA//   
    6.29Castor and chair base durability(坐具)腳輪耐久測試KW-BFM-09Chair swival test rig椅子旋轉耐久測試機

     
    KW-BFM-17Chair caster durablity tester椅子腳輪耐久測試機

     
    6.30Rolling resistance of the unloaded chair腳輪不加載(狀態下)摩擦阻力測試KW-BFM-24Drawer & silider durability tester直導軌耐久測試機

    1600411711647684.jpg

     
    7Test procedures - Work Chairs 測試方法 - 辦公椅
    7.1General一般要求NA//   
    7.2Loading points加載點(確認)NA//   
    7.3Combined seat and back static load test(辦公椅)座背聯合強度測試KW-BSE-23Seat and Back Bending Tester單座位坐背聯合測試機

    1600408046503426.jpg

     
    7.4Seat front edge static load test(辦公椅)座面前角強度測試KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久試驗機

    1600411711647684.jpg

     
    7.5Arm rest downward static load test – central(辦公椅)扶手中間垂直強度測試KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久試驗機

    1600411711647684.jpg

     
    7.6Arm rest downward static load test – front(辦公椅)扶手前端垂直強度測試KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久試驗機

    1600411711647684.jpg

     
    7.7Arm rest sideways static load test(辦公椅)扶手側拉強度測試KW-BSE-16Arm rest tester坐具扶手試驗機

     
    7.8Foot rest static load test(辦公椅)腳踏強度測試KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久試驗機

    1600411711647684.jpg

     
    7.9Seat and back durability(辦公椅)座背聯合耐久測試KW-BSE-23Seat and Back Bending Tester單座位坐背聯合測試機

    1600408046503426.jpg

     
    KW-BFM-38-2Two positions seat and back tester
    二工位坐具綜合試驗機-前推式

     
    7.10Arm rest durability(辦公椅)扶手耐久測試KW-BSE-16Arm rest tester坐具扶手試驗機

     
    7.11Swivel test(辦公椅)旋轉耐久測試KW-BFM-09Chair swival test rig椅子旋轉耐久測試機

     
    7.12Foot rest durability(辦公椅)腳踏耐久測試KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久試驗機

    1600411711647684.jpg

     
    7.13Castor and chair base durability(辦公椅)腳輪耐久測試KW-BFM-09Chair swival test rig椅子旋轉耐久測試機

     
    KW-BFM-17Chair caster durablity tester椅子腳輪耐久測試機

     
    7.14 Rolling resistance of the unloaded chair(辦公椅)腳輪無負載摩擦阻力測試KW-BFM-24Drawer & silider durability tester直導軌耐久測試機

    KW-BFM-24.jpg

     
    8Test Procedures - Loungers 測試方法 - (戶外休閑)躺椅
    8.1General一般要求///   
    8.2Seat and back static load test(戶外躺椅)座背聯合強度測試KW-BSE-17Universal test rig for EN furniture
    多功能家具綜合框架試驗機

     
    8.3Additional seat and leg rest static load test(戶外躺椅)座面和擱腳附加的強度測試KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久試驗機

    1600411711647684.jpg

     
    8.4Seat and back durability testNANA//   
    8.4.1Seat and back durability test procedure(戶外躺椅)座背聯合耐久測試KW-BSE-17Universal test rig for EN furniture
    多功能家具綜合框架試驗機

     
    8.4.2Additional seat durability test procedure(戶外躺椅)座背聯合耐久附加測試KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久試驗機

    1600411711647684.jpg

     
    8.5Durability test on back rest mechanism(戶外躺椅)座背聯合強度測試KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久試驗機

    1600411711647684.jpg

     
    8.6Arm rest downwards static load test(戶外躺椅)扶手垂直強度測試KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久試驗機

    1600411711647684.jpg

     
    8.7Arm rest durability test(戶外躺椅)扶手耐久測試KW-BSE-16Arm rest tester坐具扶手試驗機

     
    8.8Impact test(戶外躺椅)座面沖擊強度測試KW-BSE-17Universal test rig for EN furniture
    多功能家具綜合框架試驗機

     
    KW-BFM-11Seating Impact Tester 座面沖擊測試機

     
    8.9Lifting test for mobile loungers(戶外躺椅)把手提起耐久測試KW-BSE-17Universal test rig for EN furniture
    多功能家具綜合框架試驗機

     
    KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久試驗機

    1600411711647684.jpg

     

    上一篇:BS EN 1725:1998 Domestic furniture Beds and mattresses Safety requirements and test methods

    下一篇:BS EN 581-1:2017 Outdoor furniture-Seating and tables for camping, domestic and contract use-Part 1

    發表評論:

    評論記錄:

    未查詢到任何數據!

    在線咨詢

    點擊這里給我發消息 售前咨詢專員

    點擊這里給我發消息 售后服務專員

    在線咨詢

    免費通話

    24小時免費咨詢

    請輸入您的聯系電話,座機請加區號

    免費通話

    微信掃一掃

    微信聯系
    返回頂部
    手机偷自视频区视频真实-亚洲人爆乳高清不卡在线-微拍国产私拍福利88精品视频-国产真实迷奷系列在线看-美国国产伦久久久久久久-五十路在线中文字幕无码-青青青热久免费精品视频无码,日韩无砖专区2020不卡小说,最新电影在线观看2019,加勒比国偷自产第150